Victron Energy BAT512110610 12.8V 100Ah LiFePO4 Rechargeable Smart Battery

Description Model No LFP-BMS12.8/100 Description Victron Energy BAT512110610 12.8V 100Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Smart Battery with Integrated Cell Balancing and Cell Monitoring Original Brand Victron Energy BAT512110610 Chemistry Lithium Iron Phosphate Voltage 12.8V Nominal Capacity 100Ah Watt Hour 1280.0Wh Maximum Continuous Discharge Current 180A Termination M8 Width 321mm Height 197mm Length/Breadth/Depth 152mm Weight 15000g Brand High capacity 12.8V 100Ah Lithium Iron Phosphate (LiFePO4) smart battery module with built-in Bluetooth With bluetooth capabilities, users can monitor their Victron LiFePO4 battery through the Victron Connect app (available for iOS and Android). For Optimum efficiency, always update to the latest firmware using the Victron Connect app prior to installation. Specifications: Cycle life: 2500 cycles (80% DoD), 3000 cycles (70% DoD), 5000 cycles (50% DoD) Max. continuous discharge current: 180A Recommended continuous discharge current: ≤90A End of discharge voltage: 11V Charge voltage: 14.0V – 14.4V (14.2V recommended) Float voltage: 13.5V Max. charge current: 270A Recommended charge current: ≤45A Operating temperature: -20°C to 50ºC Storage temperature: -45°C to 70ºC Humidity (non-condensing): max. 95% Protection class: IP22   Consider implementing Victron Energy’s range of Lithium Iron Phosphate modules in high energy demand applications: More RUGGED compared to lead acid batteries. LiFePO4 batteries do not need to be fully charged all the time. A partial charge may even slightly improve service life. In addition, LiFePO4 batteries have a wider operating temperature range, excellent cycling performance, lower internal resistance and higher rate of efficiency than lead acid batteries. Lead acid batteries will fail prematurely due to sulfation if the battery is rarely, or never at all, fully charged or if the battery is stored for long periods partially or fully discharged. Higher ENERGY EFFICIENCY than lead acid batteries. Round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of LiFePO4 batteries is 92% compared to lead acid batteries at around 80%. In off-grid applications like solar and/or wind, better energy efficiency means less energy loss. SMALLER and LIGHTER than lead acid batteries. LiFePO4 batteries are up to 70% smaller and 70% lighter than equivalent lead acid batteries.   Important Information: Victron Energy LFP batteries have integrated cell balancing and cell monitoring. Up to five batteries can be paralleled and up to four batteries can be series connected, so that a 48V battery bank of up to 3000Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS) with two M8 circular connector cord sets. The most Popular BMS is the VE Bus BMS This BMS can be used to control VE bus devices such as the Victron Inverter Charger range. If not connecting to a victron inverter charger use the smallBMS *See product manual for more information   Data Sheet: LFP-BMS12.8_1007179   SHIPPING RESTRICTIONS APPLY Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES – Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020 For more information regarding the Victron Energy BAT512110610 12.8V 100Ah LiFePO4 Rechargeable Smart Battery please contact us via any of the methods available here or message us on social media and we’ll be happy to assist!